A sleek solution to regain space on your desk space or get your NAS away from your feet!
This universal mount can be adapted to fit almost any 1-bay or 2-bay NAS out there. There are some predefined widths based mostly on dimensions of Synology products.
There is a dedicated compartment for the power supply. This is optional and can be added at no extra cost. Please verify if your supply fits the compartment prior to ordering.
As the mounts are 3D-printed, differing widths or power supply compartments can be included at no extra cost!
Supported dimensions of the NAS
The NAS is placed sideways into the U-shaped mount. The front of the NAS can point either to the left of the right when mounted to the wall.
- No depth restriction, the mount is open on both sides
- No height restriction, the mount is open to the top
- Pre-build variants with 75 mm, 105 mm and 112 mm available. Differing widths can be customized.
- Physical maximum is about 120 mm width or 2.5 kg (My current test setup)
Supported dimensions of the power supply
- Maximum width and height: 35 mm x 58 mm / 1.38 in x 2.28 in
- Minimum length: 105 mm / 4.1 in
- Maximum length: 115 mm / 4.5 in
(The mount comes with clips to secure the power supply. Without using the clips on either side, there is no maximum length limit.) - If you want to add a power supply with different dimensions, I can adapt the compartment for you.
Pre-built variant with 75 mm (2.95 in) without power supply compartment
This will fit 1-bay NAS devices.
As most of the 1-bay devices use a wall power supply, the default configuration excludes the power supply compartment.
| Matching Models | Width of NAS | Verified 1 |
|---|---|---|
| QNAP Turbo Station TS-119P II | 73 mm | Online only |
| Synology DS120j | 71 mm | YES |
| Synology DS124 | 71 mm | Online only |
Pre-built variant with 105 mm (4.13 in) with power supply compartment
This will fit slimmer 2-bay NAS devices:
| Matching Models | Width of NAS | Verified 1 |
|---|---|---|
| Asustor Drivestor 2 AS1102T | 102 mm | Online only |
| QNAP Turbo Station TS-231P3 | 102 mm | Online only |
| Synology DS216j | 105 mm | YES |
| Synology DS220j | 100 mm | YES |
| Western Digital My Cloud Home Duo | 102 mm | Online only |
Pre-built variant with 112 mm (4.41 in) with power supply compartment
This will fit broader 2-bay NAS devices:
| Matching Models | Width of NAS | Verified 1 |
|---|---|---|
| Asustor AS6702T Lockerstor 2 Gen2 | 108 mm | Online only |
| Synology DS720+ / DS723 / DS723+ | 106 mm | YES |
| Synology DS220+ / DS223 | 108 mm | YES |
| Western Digital My Cloud Pro PR2100 | 109 mm | Online only |
Materials and Quality
The material used to 3D-print the mount is ASA (Acrylonitrile styrene acrylate).
In contrast to PLA, which is often associated with FDM printing, the heat deflection temperature is at about 100 °C / 212 °F.
And unlike ABS, ASA has a high weather and UV resistance, so neither direct sunlight nor heat buildup can compromise the strength of the mount.
If you’re interested in my testing procedures, also have a look into Testing!
Colors
I can provide various color options for the material ASA.
Please note that I do not offer “signal white” (RAL9003 / ~ Pantone 705) but “pure white” (RAL9010 / ~ Pantone Cool Grey 1). Signal white is the “whiter white” but it is usually created with the pigment titanium dioxide, which unfortunately has negative impact on the strength of the mount.
- For some devices in the lists above, I took the measurements from their online-datasheet. In case you are interested in a mount for such device, please help me verify the dimensions. Thank you! ↩︎